WATLOW Band and Strip Emitters
Watlow’s diverse radiant heater line provides a solution for almost any application requiring radiant heat. Watlow’s capabilities cover a wide range of needs, from contamination-resistant panel heaters to rugged tubular elements and high temperature ceramic panels.
Product Description
Product Description
These heaters are constructed using Watlow’s exclusive mineral insulation, which has high thermal conductivity. The band and strip emitters are also constructed of rugged stainless steel sheath with a high emissivity coating. These heaters can operate at temperatures to 1300°F (700°C), and 30 W/in2 (4.7 W/cm2)
Specification
Specification
Material |
Maximum Operating Temperatures |
Maximum Watt Densities |
°F |
°C |
W/in2 |
W/cm2 |
Stainless steel |
1300 |
700 |
30 |
4.7 |
Maximum operating temperature up to 1300°F (704°C)
Maximum watt densities up to 30 W/in² (4.7 W/cm²)
Strip Emitters: width: 2in. (51mm); length: 6in. (152mm). minimum, 31 in. (787mm)maximum
Band Emitters: width: 1 in. (25mm), 2 in. (51mm), 3 in (76mm). maximum; Segment Length: 6 in. (152mm) to 42 in. (1067mm) maximum
Mounting studs and mounting clips available
Optional thermocouple or thermocouple pocket welded to sheath
Contact Watlow representative for partial arcs up to full 360 degree coverage
High emissivity coating on inside is standard. For high emissivity coating on the outside, contact your Watlow representative
Post terminals are standard. High-temperature leads are available on bands only.
Applications
Applications
Heating rotating drums and rollers
Tube ovens
Small spot heating
Heat shrinking and curing wire coatings
Heat laminating wheels
Features & Benefits
Features & Benefits
Features |
Benefits |
Exclusive mineral insulation |
Combines dielectric strength and superior thermal conductivity
Transfers heat rapidly to the sheath
|
Provides an almost instant response to temperature control |
Eliminates thermal lag and temperature overshoot associated with other heaters
|
Reviews
There are no reviews yet.