WATLOW FIREBAR® Single/Double-Ended Heaters


Single- and double-ended tubular heaters lend themselves to virtually the entire range of immersion and air heating applications. They have a variety of mounting and termination options that make them ideal for industrial applications. Watlow® tubular heaters are UL® and CSA component recognized up to 240V.

Categories: , .
Product Description

Product Description

FIREBAR® heating elements provide added heating performance over standard round tubular heating elements—especially for immersion applications in petroleum-based liquids requiring high kilowatts.

The FIREBAR’s unique flat surface geometry packs more power in shorter elements and assemblies, along with a host of other performance improvements. These include:

  • Minimizing coking and fluid degrading
  • Enhancing the flow of fluid past the element’s surface to carry heat from the sheath
  • Improving heat transfer with a significantly larger boundary layer allowing much more liquid to flow up and across the sheath’s surface

FIREBAR elements are available in single- and double-ended constructions with one inch or 5⁄8 inch heights. These two configuration variables make it possible to use FIREBAR elements instead of round tubular elements in virtually all applications.

FINBAR™ is a special version of the one inch, single-ended FIREBAR. FINBAR is specially modified with fins to further increase surface area for air and gas heating applications.

Specification

Specification

Material Maximum Operating Temperatures Maximum Watt Densities
°F °C W/in2 W/cm2
Alloy 800 1400 760 60 9.3
304 stainless steel 1200 650 60 9.3
  • Double-Ended: Watt densities up to 120 W/in² (18.6 W/cm²)
  • Single-ended: Watt densities up to 60W/in² (9.3 W/cm²)
  • Alloy 800 sheath temperatures up to 1400°F (760°C)
  • 304 stainless steel sheath temperatures up to 1200°F (650°C)
  • Voltages to 240VAC
  • Amperages up to 48 amperes per heater or 16 amperes per coil
  • Applications

    Applications

  • Restaurant and food processing equipment
  • Food warming
  • Food preparation
  • Tank and platen heating
  • High-temperature resins
  • Features & Benefits

    Features & Benefits

    Features Benefits
    70 percent greater surface area per linear inch compared to a 0.430 in. (11mm) diameter round tubular heater
  • Reduces watt density or packs more kilowatts in smaller bundles
  • Compacted MgO insulation
  • Maximizes thermal conductivity and dielectric strength
  • Nickel-chromium resistance wires
  • Precision wound
  • 0.040 in. (1 mm) thick MgO walls
  • Transfers heat more efficiently away from the resistance wire to the sheath and media
  • Conducts heat out of the element faster
  • Three resistance coil design (double-ended only)
  • Configurable to either one- or three-phase power
  • Readily adapts to a variety of electrical sources and wattages outputs
  • Slotted end (single-ended only)
  • Provides installation ease in clamp-on applications
  • Lavacone seals
  • Provides protection against humid storage conditions, moisture retardant to 221°F (105°C)
  • Reviews (0)

    Reviews

    There are no reviews yet.

    Be the first to review “WATLOW FIREBAR® Single/Double-Ended Heaters”